1. Manuals
  2. Brands
  3. Contec Manuals
  4. Floor Machine
  5. HUBBEL
  6. Instruction manual

Contec HUBBEL Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HUBBEL
Instruction manual
Betriebsanleitung
Instructions techniques

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HUBBEL and is the answer not in the manual?

Questions and answers

Related Manuals for Contec HUBBEL

Summary of Contents for Contec HUBBEL

  • Page 1 HUBBEL Instruction manual Betriebsanleitung Instructions techniques...

  • Page 2: Table Of Contents

    Instruction manual HUBBEL - 2 - Index 1. EU-Declaration of Conformity …3 2. Technical Data ...4 2.1 Planer ...4 2.2 Tools ...4 3. Applications of the tools ...5 4. Safety rules ...5 5. Operating ...6 6. Changing the drum ...5 7.

  • Page 3: Eu-Declaration Of Conformity

    Instruction manual HUBBEL - 3 - CONTEC GmbH Hauptstrasse 146 57518 Alsdorf EU-Declaration of Conformity According to the Machine Directive 98/37/EC (89/392/EWG), Appendix II A We hereby declare that the machine Type: Floor Planer Name: HUBBEL conforms with the following standards which have been valid at the date written below:...

  • Page 4: Technical Data

    Instruction manual HUBBEL - 4 - 2. Technical Data 2.1 Planer Width of cut 160 mm Width 34 cm Length 100 cm Height 93 cm Weight 54 kg Dust port ¢ 50 mm Electric motor Standard 230 V, 1.5 kW, 50 Hz 110 V, 2.4 hp, 60 Hz...

  • Page 5: Applications Of The Tools

    4. Safety rules Attention ! The HUBBEL floor planers are constructed according to existing safety rules and regulations. These technical precautions should not be removed or changed under any circumstances. While operating the machines the following points should also be kept in mind: 1.

  • Page 6: Operating

    Instruction manual HUBBEL - 6 - 5. Operating a. After mounting the appropriate tools the operation of the planer can begin. b. Tilt the planer backwards until the tools are clear of the ground. Switch the planer Attention: Never switch the motor of the planer on while the tools still touch the floor.

  • Page 7: Changing The Drum

    Instruction manual HUBBEL - 7 - 6. Changing the drum Attention: Before any maintenance, the machine must be brought to a complete stand still. Always disconnect the machine if it is an electric model. Unscrew the screws on the right side plate (M10, Key width 17 mm) Carefully remove the side plate.

Table of Contents