Advertisement
[FX1 only]
1.
PS SW
2.
PS VOICE
3.
PS 1 PITCH
4.
PS 1 PRE DELAY
5.
PS FEEDBACK
6.
PS 1 EFX LEVEL
7.
PS 2 PITCH
8.
PS 2 PRE DELAY
9.
PS 2 EFX LEVEL
10. PS DIRECT LEVEL
(0 -1)
OFF, ON
1MONO
2MONO
(0 - 2)
2STEREO
(0 - 48)
-2400 – 2400
(0 - 100) 0 – 100ms
(0 - 100) Adjusts the feedback amount of the pitch shift sound.
(0 - 100) Adjusts the volume of the pitch shifter, voice 1.
(0 - 48)
-2400 – 2400
(0 - 100) 0 – 100ms
(0 - 100) Adjusts the volume of the pitch shifter, voice 2.
(0 -100) Adjusts the volume of the direct sound.
[PS] PITCH SHIFTER
Switches pitch shifter on/off. This is a mono/stereo effect.
One-voice pitch-shifted sound output in mono. Pitch 2
is disabled in this mode.
Two-voice pitch-shifted sound (1:PITCH, 2:PITCH)
output in mono.
Two-voice pitch-shifted sound (1:PITCH, 2:PITCH)
output through L channel and R channel. Direct level is
centered in the stereo spectrum.
Adjusts the amount of pitch shift (the amount of
interval) in semitone steps. 0 (24) is the midpoint.
Adjusts the time from when the direct sound is heard until
the pitch shifted sounds of Pitch 1 are heard.
Adjusts the amount of pitch shift (the amount of
interval) in semitone steps. 0 (24) is the midpoint.
Adjusts the time from when the direct sound is heard until
the pitch shifted sounds of Pitch 2 are heard.
Advertisement
