Advertisement
1.
BC SW
2.
BC FILTER
3.
BC SAMPLE RATE
4.
BC EQ LOW
5.
BC EQ HIGH
6.
BC LEVEL
1.
TR SW
2.
TR TYPE
3.
TR PHASE
4.
TR RATE
5.
TR BPM SYNC
6.
TR SHAPE
7.
TR DEPTH
8.
TR PAN SELECT
9.
TR EFFECT LEVEL
(0 -1)
OFF, ON
(0 - 127) Adjusts the bit crusher LPF cutoff frequency.
(0 - 127)
Adjusts the sample rate (higher values = lower sample rates).
(0 - 30)
-15dB – 15dB Gain of the low frequency range ±15dB.
(0 - 30)
-15dB – 15dB Gain of the high frequency range ±15dB.
(0 - 127) Adjusts the volume of the bit crusher effect.
(0 -1)
OFF, ON
triangle
up sawtooth
down sawtooth left to right modulation
(0 - 5)
sine
square
random
(0 - 100) 0 – 360°
(0 - 100) 8000 – 20ms
OFF, 2, 3/2, 4/3, 1, 3/4, 2/3, 1/2, 3/8, 1/3, 1/4, 3/16,
(0 - 20)
1/6, 1/8, 3/32, 1/12, 1/16, 3/64, 1/24, 1/32, 3/128
(0 - 100) Adjusts changes in volume level. A higher value will steepen
the waveform selected in TR TYPE.
(0 - 100) Determines the depth of the tremolo effect.
Switches tremolo effect from mono (0/TRE) to stereo
(0 – 1)
(1/PAN).
(0 - 100) Adjusts the volume of the tremolo effect.
[BC] BIT CRUSHER
Switches bit crusher on/off. This is a mono effect.
[TR] TREMOLO
Switches tremolo on/off. This is a mono/stereo effect.
slight dip at middle and ends
right to left modulation
smooth modulation
on/off modulation
random volume and stereo value added
The phase of the wave on which to start.
Adjusts the rate of the tremolo effect. When BPM
sync is turned on, this parameter is disabled.
Advertisement
