Shutting Down And Clean-Up - Landa PGDC5-3500 Operator's Manual

Ces produits chimiques endommag-
eront la machine et endommageront
la surface étant nettoyée
Rinsing
It will take a few seconds for the
detergent to clear.Apply safety
latch to spray gun. Remove black
soap nozzle from the quick coupler.
Select and install the desired high
pressure nozzle. NOTE: You can
also stop detergent from flowing by
simply removing detergent siphon
tube from bottle.
Shutting Down And
Clean-up
STEP 1: Remove detergent suction
tube from container and insert into
one (1) gallon of fresh water. Pull
trigger on spray gun and siphon
water for one minute.
STEP 4: Squeeze trigger on spray
gun to relieve remaining pressure.
STEP 2: Turn burner switch off and
continue spraying, allowing the
water to cool to below 100°F.
STEP 5: Remove water supply
hose.
Landa PGDC Operator's Manual 8.916-596.0 - BF
Burner
Switch
Operations
Engine
Key Switch
STEP 3: Turn engine key switch off
and turn off water.
STEP 6: Disconnect high pressure
hose from high pressure outlet.
13