The Salt Container; How To Fill The Rinse Aid Dispenser; Daily Use - Zanussi ZDLN7531 User Manual

procedure is complete. The procedure is repeated
periodically.

THE SALT CONTAINER

CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
The salt is used to recharge the resin in the water
softener and to assure good washing results in

daily use.

How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only for
the first time).
3. Fill the salt container with dishwasher salt (until
it is full).
4. Carefully shake the funnel by its handle to get
the last granules inside.
5. Remove the salt around the opening of the salt
container.
DAILY USE
1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
until the appliance is
6. Turn the cap of the salt container clockwise to
close the salt container.
CAUTION! Water and salt can come
out of the salt container when you fill
it. After you fill the salt container,
immediately start the shortest
programme to prevent corrosion. Do
not put dishes in the baskets.

HOW TO FILL THE RINSE AID DISPENSER

CAUTION! Only use rinse aid
designed specifically for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid reaches
the marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into
position.
Fill the rinse aid dispenser when the
indicator (A) is clear.
8. Close the water tap when the programme is
complete.
A B
C
13