Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDLN2521
Summary of Contents for Zanussi ZDLN2521
- Page 1 User Manual GETTING STARTED? EASY. ZDLN2521 EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE FOR: Get usage advice, brochures, trouble shoot- er, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by the •... -
Page 4: Water Connection
cable need to be replaced, this must be carried • Dishwasher detergents are dangerous. Follow out by our Authorised Service Centre. the safety instructions on the detergent • Connect the mains plug to the mains socket packaging. only at the end of the installation. Make sure that •... -
Page 5: Product Description
PRODUCT DESCRIPTION The graphics below is just a general product overview. For more detailed information, refer to other chapters and/or documents provided with the appliance. Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket... -
Page 6: Control Panel
CONTROL PANEL On/Off button/Reset button Extra Power button Delay start button AUTO programme button Indicators Programme buttons INDICATORS Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". -
Page 7: Extra Power
EXTRA POWER The appliance senses the degree of soil and the amount of dishes in the baskets. It adjusts the This option improves the washing results of the temperature and quantity of water as well as the selected programme. It increases the wash wash duration. -
Page 8: Basic Settings
Consumption values Water (l) Energy (kWh) Duration (min) Programme 30 min 9.2 - 11.2 0.556 - 0.68 Pre-rinse 3.4 - 4.2 0.012 - 0.015 90 min 9.6 - 11.7 0.886 - 1.083 0.920 /0.936 AUTO 9 - 12.8 0.694 - 1.1223 120 - 170 Machine Care 8.8 - 10.7... -
Page 9: The Water Softener
THE WATER SOFTENER When the appliance is in setting mode, the indicators on the control panel represent available The water softener removes minerals from the settings. For each setting, a dedicated indicator water supply, which would have a negative effect flashes: on the washing results and on the appliance. -
Page 10: The Rinse Aid Empty Notification
notification for refilling rinse aid. However, for best drying performance, always use rinse aid. Water softener level Amount of water (l) If standard detergent or multi-tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active. END SOUND You can activate an acoustic signal that sounds when the programme is completed. -
Page 11: Setting Mode
SETTING MODE Use OK to enter the selected setting and to confirm changing its value. How to enter setting mode You can enter setting mode before starting a How to change a setting programme. You cannot enter setting mode while Make sure the appliance is in setting mode. -
Page 12: How To Fill The Rinse Aid Dispenser
HOW TO FILL THE RINSE AID DISPENSER 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. - Page 13 HOW TO DELAY THE START OF A 3. If the programme has a prewash phase, put a PROGRAMME small quantity of detergent on the inner part of the appliance door. You can delay the start of the selected programme 4. Close the lid. Make sure that the release button by 3 hours.
-
Page 14: Hints And Tips
END OF THE PROGRAMME All buttons are inactive except for the on/off button. When the programme is complete, the Auto Off function switches the appliance off automatically. HINTS AND TIPS GENERAL (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal Follow the hints below to ensure optimal cleaning cleaning and drying results. -
Page 15: Care And Cleaning
• The correct quantity of detergent is used. • Put cutlery and small items in the cutlery basket. • Make sure that the spray arms can move freely LOADING THE BASKETS before you start a programme. • Always use the whole space of the baskets. UNLOADING THE BASKETS •... -
Page 16: External Cleaning
EXTERNAL CLEANING 4. Wash the filters. • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. CLEANING THE FILTERS The filter system is made of 3 parts. 5. -
Page 17: Cleaning The Lower Spray Arm
CLEANING THE LOWER SPRAY ARM 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 2. - Page 18 Problem and alarm code Possible cause and solution You cannot activate the appli- • Make sure that the mains plug is connected to the mains sock- ance. • Make sure that there is no damaged fuse in the fuse box. The programme does not start.
- Page 19 Problem and alarm code Possible cause and solution The temperature of the water • Make sure that the temperature of the inlet water does not ex- inside the appliance is too high ceed 60°C. or malfunction of the tempera- • Switch the appliance off and on.
-
Page 20: The Washing And Drying Results Are Not Satisfactory
WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause and solution Poor washing results. -
Page 21: Technical Information
Problem Possible cause and solution There are residues of detergent • The detergent tablet was stuck in the dispenser and therefore in the dispenser at the end of the was not completely washed away by water. programme. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arms are not blocked or clogged. -
Page 22: Environmental Concerns
Power consumption Left-on mode (W) Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. LINK TO THE EU EPREL DATABASE database using the link https://eprel.ec.europa.eu and the model name and product number that you... - Page 24 WWW.ZANUSSI.COM/SHOP...