Terminal Block - Panasonic PAW-FC Installation And Maintenance Manual

N Neutral
L
Phase
Lc
Condensate Pump phase
H Heating
C Default contact condensate pump
V Cooling valve
V1, V2, V3 Motor speed
z
Connect power supply L (line), N (neutral) and (earthing) according to the wiring diagram and respect the polarities shown on the
bottom of the electrical boxes.

8.3 Terminal block

The unit can be equipped with two different screw clamp terminal connector types:
1 - U shape
2 - Hook shape
When connecting power supply it is forbidden to put more than one wire end per screw clamp terminal with
«hook» shape connector or more than one wire end per screw clamp terminal with "U" shape connector (cf.
Daisy chain section).
WARNING
Right hook side use is forbidden
18
1 – Power supply cable
2 – Auxiliary cable