Viessmann VITOSOL 200-FM SV2F Design Manual page 48

Design Information
Slope Roof Installations for Vitosol 200-FM Flat Plate Collectors
Overview - standing seam steel roof installation
Legend
A Clamping brackets with hole size Ø 5/16 in. (Ø 9 mm).
It is recommended that a min. of 4 clamping brackets
are required per support rail E (clamping brackets are
ordered separately from Viessmann)
B Collector
C Mounting rail
D Standing seam profile clamps (field supplied)
E Support rail (field supplied)
F Standing seam steel roof
Type a
SV
93c (2380)
SH
41c (1056)
48
in. (mm) b
74c - 82c (1900 - 2100)
17c - 33b (450 - 850)
Install clamping brackets A to mounting rail C and
secure with field supplied fasteners to the field supplied
support rail E. For dimensions see 'Installing the
mounting frames' on pages 49 and 50.
in. (mm) c
≥ 94b (≥ 2400)
≥ 42b (≥ 1077)
Refer to the Vitosol-FM Installation Instructions
for all mounting hardware dimensions and
detailed installation instruction
Solar System Design Guide
in. (mm) d in. (mm)
4 (103)
4 (103)