Table of Contents
Advertisement
Instruction Manual
7.4 Removing the gauge from service
WARNING! Contaminated parts can be detrimental to health. Before beginning work, find out whether
parts are contaminated and adhere to the relevant regulations and precautions for handling contaminated
parts.
CAUTION! Dirt and damage impair the function of the vacuum component. Take appropriate measures to
ensure cleanliness and prevent damage. Touching the product or parts with bare hands increases the
desorption rate. Always use clean, lint free gloves as well as clean tools when working with this product.
1) Vent the vacuum system and turn off power to the gauge.
2) Unplug the cable and remove the gauge from the chamber.
3) Re-install the protective lid.
Seal with centering ring
InstruTech
Clamp
CCM502 Hornet
Protective lid
Page 18
Advertisement
Table of Contents
