Related Manuals for Zodiac Activ AX 10
Summary of Contents for Zodiac Activ AX 10
- Page 1 Rainbow Pool Products ® PO Box 2388, Mansfield Qld 4122 Telephone STD 61-7-3849 5385 Facsimile STD 61-7-3849 5384 Email: info@rainbowpoolproducts.com.au Web: www.rainbowpoolproducts.com.au...
- Page 2 Zodiac Group Australia Pty Ltd (Zodiac) will not be responsible for liner damage caused by a cleaner which is in disrepair, pattern removal from a vinyl liner, or a cleaner used in a pool having an aged or deteriorated liner.
- Page 3 Zodiac dealer or service center. Always insist on genuine Zodiac replacement parts. Non-Zodiac parts are not made to our specifications. They may have an adverse effect on the operation of your Zodiac AX10 Activ or may even damage it. Zodiac AX10 Activ Complete Cleaner 1.
-
Page 4: Installation
If return inlet directional fittings can’t be directed far enough down to prevent water flow affecting the natural movement of the Zodiac hose, you will need to install Zodiac return line diverters. These are available from your local Zodiac dealer. - Page 5 Installation 4th case: with any other type of Skimmer Box and Vac plate AD Flow valve Simply insert the AD Flow valve directly into the universal weir cuff which will then fit into the top of the Vac plate. Universal Weir Cuff Note: The AD Flow valve has three settings: High (3), Medium (2) and Low (1).
-
Page 6: Check Cleaner Flow
Installation 4. Connecting Cleaner head to Flow Regulator Valve 1. Remove orange sticker off leader hose 2. Attach the Flow Regulator Valve to the leader hose and connect AX10 Activ cleaner head to the Flow Regulator Valve. 5. Re-connecting to Skimmer Box 1. -
Page 7: Care And Maintenance
The climbing ability of the cleaner is dependent on the pool’s shape and available water flow. If Zodiac AX10 Activ is not climbing your walls, ensure the flow is correct by counting wheel speed. Also, ensure the pools surface is not covered in algae as this slippery surface will affect the cleaner’s traction. - Page 8 Care and Maintenance Removing Inlet Throat Adaptor If you are experiencing high levels of larger debris that clog the throat of the cleaner simply remove the inlet throat adaptor to enhance the size of the AX10 Activ throat inlet, thus allowing larger debris to be picked up by the cleaner.
-
Page 9: Adding Chemicals
Care and Maintenance Backwashing the Pool Filter Always disconnect the cleaner from the skimmer box before cleaning or backwashing the pool filter. After cleaning or backwashing, let the filtration system run for at least five (5) minutes to flush out the suction lines before re-connecting the cleaner. Adding Chemicals Remove the cleaner from the pool for at least four (4) hours when adding chemicals. -
Page 10: Troubleshooting
AX10 Activ, please follow the troubleshooting steps below ® to restore performance. If further assistance is required, contact Zodiac Technical Support Department at 1300 763 021. Please have your serial number and date of purchase available when you call. Problem...