Zones Setup; Settings - Robomow Tuscania 200 Manual

2.1 Zones setup

The 'Zones setup' menu allows user to set the parameters that are specific per zone .
It is possible to set up to two different zones: zone A and B, when the main zone is Zone A .
2.1.1 Set zone: A (or B)
Allows user to set the parameters that are specific per non-Base Station zone (figure 2.2):
Figure 2.2
Zones setup options
2.1.1.1 Work time
Allows the user the option of setting the operating time from 15 minutes up to 2 hours and
' MAX' which is generally 2.5 hours, depending on grass type and condition.
2.1.1.2 Learn Edge
The default distance for edge mowing is approximately 1 to 2 rounds around the perimeter.
This feature allows the user to define a specific distance in each operating zone in order to
have the mower cut the edge at a specific distance. It will remain as a learned distance until
the edge is re-learned or the 'Set default edge' is selected. To learn edge distance follow the
instructions below (figure 2.3):
Figure 2.3
Learn edge
2.1.1.3 Set Default Edge
Selecting Default Edge restores the factory default edge distance to the specific zone
selected.

2.2 Settings

The 'Settings' menu allows the user to set the options that refer to the Robomow itself and
are common to all zones (figure 2.1).
2.2.1 Child Guard
Child guard is a feature that when activated will help deter use by young children and other
unauthorized people. It will prevent operation to those not familiar with the mower. The key
sequence to unlock the guard for operation is pressing the 'UP' arrow key and then the
'STOP' key to unlock the controls. Two minutes of inactivity will re-lock the keys.
It is strongly recommended to use the "Child Guard" menu option in order to prevent
operation by children or others who are not familiar with the safe operation of the
Robomow.
Set zone: A Set zone: A
2.1.1 2.1.1
Set zone: B Set zone: B
Set zone: A Set zone: A Set zone: A
Press GO Press GO Press GO
Work time Work time Work time Work time
Press GO Press GO Press GO Press GO
Learn edge Learn edge Learn edge Learn edge
Press GO Press GO Press GO Press GO
Learning edge Learning edge Learning edge Learning edge
STOP to set STOP to set STOP to set STOP to set
21
2.1.1.1 2.1.1.1
Work time Work time
Learn edge Learn edge
2.1.1.2 2.1.1.2
2.1.1.3 2.1.1.3 Set default edge Set default edge
Scroll to the zone of which Scroll to the zone of which
you want to learn the edge you want to learn the edge
distance and press 'GO' distance and press 'GO'
Scroll DOWN once to Scroll DOWN once to
'Learn edge' option 'Learn edge' option
Press 'GO' to start Press 'GO' to start
the learning process the learning process
While driving around the perimeter. While driving around the perimeter.
Follow the mower and press the Follow the mower and press the
'STOP' button when the desired 'STOP' button when the desired
distance has been reached. distance has been reached.
EN