Robomow Tuscania 200 Manual page 60

removed and it will not operate without it. The fuse is supplied
in a small plastic bag attached to the Robomow (located under
the Bumper Cover).
Lift the Bumper Cover and insert the fuse. The fuse can be
inserted in either direction. See figure 1.22
Robomow will now power up (wake up). The Batteries are
charged at the factory and have plenty of power to perform the
initial setup and test run.
process is completed the batteries need to be charged 16 hours
in the Base Station before the first operation.
1.4.2 Robomow Settings
EN
Control Panel
On the top of the rear side of Robomow there is a control panel. The control panel consists
of a display, keypad and operating lamp (figure 1.23).
Control Panel
The 'GO' button is used as a means to select or confirm different menu options or settings;
'Up
The 'STOP' button has two different functions: when pressing during automatic operation it
will stop Robomow and blade operation immediately and when pressing at any time during
the menu selection process it will bring you one step back in the menu.
'Main Switch' button is used to switch off the Robomow. It is required to switch off the
Robomow when carrying it between zones.
Language, Time and Date settings
'Language' is the first setting you are asked to set, as Robomow wakes up. Follow
the instructions below, as shown in figure 1.24.
00:00 00:00 00:00
15:23 15:23
Your Robomow is shipped with the batteries fuse
However, after the initial set-up
STOP button
STOP STOP
Figure 1.23
Main Switch
button
/ Down ' arrow keys will allow you to scroll through the menu items;
IMPORTANT INFORMATION!
Follow the instructions on the LCD display -
Robomow will friendly instruct you, step by step, how to complete the setup
Language Language Language
Press GO Press GO Press GO
English (US) English (US) English (US) English (US)
Scroll 'UP' or 'DOWN' Scroll 'UP' or 'DOWN'
to choose your language to choose your language
Confirm Confirm Confirm Confirm
and press GO to confirm and press GO to confirm
Time and Date Time and Date Time and Date
Press GO Press GO Press GO
Scroll to set the time and date Scroll to set the time and date
dd/mm/yy dd/mm/yy dd/mm/yy
and press 'GO' for the next digit and press 'GO' for the next digit
next digit next digit next digit
('STOP' is used to go back) ('STOP' is used to go back)
Press 'GO' to confirm and continue Press 'GO' to confirm and continue
16/04/07 16/04/07
with the instructions at the next with the instructions at the next
Confirm Confirm
subparagraph ('Wire position' test) subparagraph ('Wire position' test)
Operating Lamp
GO GO
LCD display
GO / START
window
button
Press 'GO' Press 'GO'
defines also the 'Time and date' format. defines also the 'Time and date' format.
Press 'GO' Press 'GO'
18
Figure 1.22 -
Inserting batteries fuse
DOWN
Rain
arrow
sensor
Please note that there are Please note that there are
'English' and 'English (US)' under 'English' and 'English (US)' under
the 'Language' menu, as the language the 'Language' menu, as the language
Figure 1.24
Language, Time
and Date setting
UP
arrow