Programming A Favorite Track Selection Of A Cd - Burmester 061 Owner's Manual

PROGRAMMING A FAVOURITE TRACK SELECTION OF A CD
A total of 50 tracks from a CD can be programmed for playback in a selected order. Programming can only be done
using the remote control. The program plays the tracks in the selected order.
Activating the To start the program function press the key PROGR. of the remote control. The
programming mode alphanumeric display will show PROGRAM shortly and then starts the programming mode.
The display shows now P: 01 T: 00 whereby P stands for program space, T stands for the
track wich should be programmed on this program space.
The selection of a track will be done with the arrow key ▲ for the following tracks and ▼ for
Arranging a
program the previous tracks. Press the key OK of the remote control, if you got the desired track.
This track will be saved on the selected program space. The display shows then SAVED to
confirm the programming. Afterwards the following program space will be activated for
programming.
Saving a
To save your favourite track program and leave the programming mode press the key
program
PROGR. of the remote control.
If your programming is unvalid, because the content of all programm spaces is 00 for
example, the PROGRAM LED (9) remains dark.
If your programming is valid, the PROGRAM LED (9) will light up.
Playback of the When you have left the programming mode and the PROGRAM LED (9) is on, you can start
program your favourit track selection by pressing the key PLAY/PAUSE.
Press the key ◄ of the remote control. In front of the program space number an arrow →
Selecting a defined
shows you that you can select a program space. The selection will be done with the arrow
program space
key ▲ for the following program spaces and▼ for the previous tracks.
Press the key ► of the remote control. In front of the track number an arrow → shows that
Programming a
track you can choose a track for the selected program space. The selection of a track will be
done with the arrow key ▲ for the following tracks and ▼ for the previous tracks Press the
key OK of the remote control, if you got the desired track. This track will be saved on the
selected program space. The display shows then SAVED to confirm the programming.
Afterwards the following program space will be activated for programming.
A programmed track selection can be deleted by pressing of the key CLEAR of the remote
Deleting a
control or by opening the sliding cover. If the program is cleared, the PROGRAM LED (9)
program
turns dark.
If you wanted to delete a program out while beeing in the programming mode, you must also
press the key CLEAR. Afterwards the display shows CLEAR?. If you want to delete the
program realy, you have to press the key OK.
11