Power Off The Firewall Using Fdm - Cisco Firepower 1100 Started Manual

Firepower Threat Defense Deployment with CDO
firepower#

Power Off the Firewall Using FDM

You can shut down your system properly using FDM.
Procedure
Step 1 Use FDM to shut down the firewall.
Note
a) Click Device, then click the System Settings > Reboot/Shutdown link.
b) Click Shut Down.
Step 2 Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 3
After the chassis has successfully powered off, you can then unplug the power to physically remove power
from the chassis if necessary.
What's Next
To continue configuring your FTD using CDO, see the CDO
For additional information related to using CDO, see the
For 6.4 and earlier, enter the shutdown command at the FDM CLI.
Power Off the Firewall Using FDM
Configuration Guides.
Cisco Defense Orchestrator
Cisco Firepower 1100 Getting Started Guide
home page.
59