Bluetooth Status Indication; Installing The External Microphone; Xa-Mc10; Pairing - Sony XAV-70BT Operating Instructions Manual

Av center
Hide thumbs Also See for XAV-70BT:
Table of Contents

Advertisement

Available languages

Available languages

For details on compatibility of your device, visit
the support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV

Bluetooth status indication

Bluetooth signal indicator: Lights up
when the Bluetooth signal is on.
ATT
Calling...
Name
0123456789
Calling...
15
Bluetooth status indications
None: No device is connected for
audio streaming purpose.
Flashing: Connection is in progress.
Lit: Connected to a device.
None: No cellular phone is connected
for handsfree calling purpose.
Flashing: Connection is in progress.
Lit: Connected to a cellular phone.
Signal strength status of connected
cellular phone.
Remaining battery status of connected
cellular phone.

Installing the external microphone

XA-MC10

To capture your voice during handsfree calling,
you need to install the external microphone XA-
MC10 (supplied).
For details on how to connect the microphone,
see the supplied installation/connections manual.

Pairing

Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
see the manual of the Bluetooth device.
*1 If you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called "passcode," "PIN code,"
"PIN number," "password," etc., depending on the
Bluetooth device.
Tip
You can pair up to 9 devices.

Searching from this unit

12:00
Check that the other Bluetooth device is set to
allow for searching (discoverable) beforehand.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
Back
BT Menu
Signal
Discoverable
Device Name
Search
Device List
2
on this unit and on
ATT
OFF
/ ON
Hide
/ Show
15
continue to next page t
1
Top
1/2
12:00
35

Advertisement

Table of Contents
loading

Table of Contents