Transferring Tracks To The Usb Device Using "Content Transfer; Playing Tracks In The Channel - Sensme™ Channels - Sony XAV-70BT Operating Instructions Manual

Registering a USB device using
"SensMe™ Setup"
USB device registration is required to enable the
SensMe™ function on the unit.
If registration is not performed along with the
installation procedure, follow the steps below.
1
Start "SensMe™ Setup" on your
computer.
2
Connect a USB device to your
computer.
3
Complete registration following the
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
Transferring tracks to the USB
device using "Content Transfer"
To enable the SensMe™ function on this unit,
tracks need to be analyzed and transferred to the
registered USB device, using "Content Transfer."
1
Connect the registered USB device to
your computer.
For "WALKMAN," connect with the MTP
mode.
For USB devices other than "WALKMAN,"
connect with the MSC mode.
"Content Transfer" starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
2
Drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
The analysis and transfer of tracks start.
For details on operations, see the Help of
"Content Transfer."
Note
The track analysis by 12 TONE ANALYSIS may take
time, depending on the computer environment.
Tip
Not only audio files but also image or video files can
be transferred using "Content Transfer." For details,
see the Help of "Content Transfer."
28
Playing tracks in the channel
— SensMe™ channels
"SensMe™ channels" automatically group tracks
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
1
Connect a USB device set up for the
SensMe™ function.
2
Touch "Source List," then "SensMe™."
3
Touch "channels."
The channel list appears.
Shuffle All
Energetic
Relax
15
4
Touch v/V to scroll the channel list.
Playback of the first track in the current
channel starts from the track's most melodic
or rhythmical section*.
* May not be detected correctly.
5
Touch the desired channel.
Playback of tracks in the selected channel
starts.
Notes
• Depending on the track, it may not be detected
correctly or may be grouped in a channel not suited
to the track's mood.
• If the connected USB device contains many tracks, it
may take time for "SensMe™ channels" to start, due
to data reading.
Tip
Tracks are played in random order. The order will vary
at each channel selection.
ZAP
12:00