Service Station Maintenance; Cleaning The Cap And Wiper - Brady BradyJet J1000 User Manual

To clean ink from the card tray or base of the printer:
1. Gently slide the printer forward or backward to access the area that needs cleaning.
2. Press down on the latch on the card tray and pull the tray forward, if needed.
3. Use isopropyl alcohol on a clean, lint-free cloth to wipe up the spilled ink. Change frequently to
a clean section of cloth. You may need to use multiple clean cloths to remove all the ink.

Service Station Maintenance

The service station (J1000-PAD KIT) is an internal component
used to clean the printhead and to cap the ink nozzles when not
in use.
1 Cap
2 Wiper
3 Ink well

Cleaning the Cap and Wiper

To clean the cap and the wiper:
1. On the printer touch screen, tap the Maintenance button.
2. Tap Service Station.
3. The printer moves internal components so that the service station dock is accessible. When it
is finished moving, open the cover on top of the printer.
4. Lift out the service station, taking care not to spill ink from the well.
5. Moisten a clean lint-free cloth with isopropyl alcohol and gently wipe the black rubber cap and
wiper clean.
BradyJet J1000 User Manual
When not printing, the printer positions the ink
cartridge so that the cap seals the printhead to
minimize ink evaporation.
When running a cleaning cycle, the printer
expels ink into the well and then wipes the ink
nozzles with the wiper.(See "Cleaning the
Printhead and Nozzles" on page 19.)
The ink well collects ink that is ejected from the
nozzles during a cleaning cycle.
Maintenance
Service Station Maintenance
1
2
3
23