Page 1
Initializing the hardware will restore device to factory, and all parameters what you set will be erased; After initializing, please activate access controllers again by setting a new strong password; For DS-K2600 series access controllers the initial jumper is in the same position, please find it in access controller mainboard as following pictures:...
Page 2
Title: How to Initial Access Controller Version: v1.0 Date: 7/19/2017 Product: Access Control Device Page: 2 of 3 Normal Status Initial Status Mothed Step 1: Please jump the jumper from Normal Status to Initial Status; Step 2: Please cut off the access controller power suplly, and please restart the access controller after several seconds, the controller buzzer buzzes a long warning;...
Page 3
Title: How to Initial Access Controller Version: v1.0 Date: 7/19/2017 Product: Access Control Device Page: 3 of 3 First Choice for Security Professionals HIKVISION Technical Support...