HIKVISION DS-K1100 Series Manual

DS-K1100 Series Card Readers Connect
Title: to DS-K2600 Series Access Controllers
by RS-485
Product: Access Control Device
DS-K1100 Series Card Readers Connect to DS-K2600
Preparation
Connect card reader to access controller is mainly applied to swiping card to open the door for entrring or
exiting. The models of card reader and access controller in this guide are as below:
Notice
1. Please cut off power supply before wiring;
2. DS-K1100 Series Card Readers support private RS485 protocol; the details about RS-485 about of
card reader are as below:
3. Correspondingly, there are RS485 interfaces in DS-K2600 series access controllers; you can find RS-
485 interface at the same position in DS-K2601/02/04 access controllers, as pictures show:
Version:
Page:
Series Access Controllers by RS-485
Card Reader
DS-K1101M/MK, DS-K1102M/MK,
DS-K1103M/MK, DS-K1104M/MK,
DS-K1107M/MK, DS-K1108M/MK
DS-K1102E/EK, DS-K1107E/EK,
DS-K1108E/EK
Color
Red
Black
Yellow
Blue
Green
White
Purple
Brown
Orange
Gray
v1.0 Date: 6/21/2017
1 of 4
Access Controller
DS-K2601,
DS-K2602,
DS-K2604
Description
Power (DC +12V)
GND
RS-485+
RS-485-
W0 (available for Wiegand Protocol)
W1 (available for Wiegand Protocol)
Beep Control (available for Wiegand Protocol)
Blue/Green LED Control (available for Wiegand Protocol)
Red LED Control (available for Wiegand Protocol)
Tamper (available for Wiegand Protocol)