Worx WX352 Original Instructions Manual page 10

High speed
Low speed
COMPONENT LIST
1. CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION
CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BELT HOOK
8. BATTERY PACK RELEASE BUTTON *
9. LED LIGHT
10
10. ON/OFF SWITCH
11. BIT CLIP
12. BATTERY CAPACITY INDICATOR *
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX352 WX352.X (3 - designation of
machinery, representative of Drill)
Charger voltage
Rated voltage
No-load speed
Impact rate
Number of clutch
position
Max torque
Chuck capacity
20V Cordless Impact Drill
WX352 WX352.X**
100-240V~50/60Hz
20 V Max***
0-450/0-2000 RPM
0-32000 BPM
22+1+1
60 Nm
13 mm
Steel
Max. Wood
drilling
capacity Brickwork
Concrete
Machine weight (Bare
tool)
**X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
***Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K & K
PA WA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value
a
Drilling into metal
h,D
Uncertainty K = 1.5 m/s²
Vibration emission value
a
Impact drilling
h,ID
into concrete
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
13 mm
40 mm
12 mm
12 mm
1.1 kg
L : 87 .9 dB(A)
pA
L : 98.9 dB(A)
wA
5.0 dB(A)
= 2.151m/s²
= 10.712 m/s²
EN