X-Rite BASF 12/6 User Manual page 3

Consult this documentation in all cases where the Attention symbol
This symbol is used to inform you of any potential HAZARD or actions that may require your attention.
CE Declaration
Hereby, X-Rite, Incorporated, declares that this model is in compliance with the essential requirements
and other relevant provisions of Directive(s) RED 2014/53/EU, LVD 2014/35/EU, EMC 2014/30/EU, and
RoHS EU 2015/863.
Models with WiFi:
CE Mark: Radio Equipment Directive (2014/53/EU)
EN 300 328 V2.1.1
EMC : EN 301 489-1 V2.1.1, EN 301 489-17 V.3.1.1,
EN 55022:2010/AC:2011, EN 55024:2010
Health : EN 62311: 2008
Safety : EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Federal Communications Commission Notice
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Models with WiFi:
Contains FCC ID: LSV-KOHSPEC
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may
void the FCC authorization to operate this equipment.
Industry Canada Compliance Statement
CAN ICES-3 (A) / NMB-3 (A)
Models with WiFi:
Contains IC ID: 20894-KOHSPEC
NOTICE:
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
this device may not cause harmful interference, and this device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio.
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
RF Exposure
The radiated output power of the device is far below the FCC radio frequency exposure limits.
•
Nevertheless, the device shall be used in such a manner that the potential for human contact
during Wi-Fi transmission is minimized.
B A S F S P E C T R O P H O T O M E T E R 1 2 / 6
appears.
1