Controller temperature indicates *SHELF-temperature only (not product temperature)
General
The Hatco Glo-Ray Heated Shelf Units are designed for maximum durability and performance with minimum maintenance.
Cleaning
To preserve the finish of the Glo-Ray Heated Shelf, it is recommended that the surfaces stains may be removed with a non-
abrasive cleaner. Hard to reach areas should be cleaned with a small brush and mild soap.
WARNING
ELECTRIC SHOCK HAZARD:
•
Turn the power switch OFF, unplug the power
cord, and allow the unit to cool before
performing any maintenance or cleaning.
•
DO NOT submerge or saturate with water.
Unit is not waterproof. Do not operate if unit
has been submerged or saturated with water.
NOTICE
Use non-abrasive cleaners only. Abrasive
cleaners could scratch the finish of the unit,
marring its appearance and making it
susceptible to soil accumulation.
CAUTION
CLEANING PRECAUTIONS
When cleaning:
• Do not use high pressure water hoses
• Do not introduce water faster then waste outlet can drain
• NEVER INTRODUCE WATER ON SELF CONTAINED UNIT
WITH AN EVPORATOR FAN
• NEVER USE A CLEANING OR SANITIZING SOLUTION
THAT HAS AN OIL BASE (these will dissolve the butyl
sealants) or an AMMONA BASE (this will corrode the
copper components of the case)
• TO PRESERVE THE ATTRACTIVE FINISH:
• DO USE WATER AND A MILD DETERGENT FOR THE
EXTERIOR ONLY
• DO NOT USE A CHLORINATED CLEANER ON ANY
SURFACE
• DO NOT USE ABRASIVES OR STEEL WOOL SCOURING
PADS (these will mar the finish)
11