6
Electrical connector
7
Retainer spring
8
Bulb socket for fog lamp
Exterior lamps
Instruments
Operation
and controls
6
7
8
Instrument
Driving
cluster display
Pull off electrical connector (6) and unclip retainer
spring (7).
Pull out bulb socket (8).
Insert new bulb so that the base locates in the recess on
the holder.
Clip in retainer spring (7) and plug the electrical
connector (6) together.
To reinstall fog lamp:
Insert fog lamp (3) and screw in fog lamp-securing
screws (4).
Install fog lamp trim panel (2) and screw in securing
screws (1).
333
Practical hints
Car care
Technical
Index
data