Safety Guidelines For The Seat Belt, Emergency Tensioning Retractor And Airbag - Mercedes-Benz G Series Operator's Manual

Safety guidelines for the seat belt, emergency
tensioning retractor and airbag
Warning!
• Damaged seat belts or belts that were highly
stressed in an accident must be replaced and
their anchoring points must also be checked.
Use only belts installed or supplied by an
authorized Mercedes-Benz Light Truck Center.
• Airbags and "ETR's" are designed to function
on a one-time-only basis. An airbag or
emergency tensioning retractor (ETR) that was
activated must be replaced.
• Do not pass belts over sharp edges.
• Do not make any modification that could
change the effectiveness of the belts.
• Do not use handles above doors for placing
such items as coat hangers etc.
Restraint systems
Instruments
Operation
and controls
Instrument
Driving
cluster display
• No modifications of any kind may be made to
any components or wiring of the "SRS". This
includes changing or removing any component
or part of the "SRS", the installation of
additional trim material, badges etc. over the
steering wheel hub, front passenger airbag
cover, door trim panels, or door frame trims,
and installation of additional electrical/
electronic equipment on or near "SRS"
components and wiring. Keep area between
airbags and occupants free from objects (e.g.
packages, purses, umbrellas, etc.).
• An airbag system component within the
steering wheel gets hot after the airbag has
inflated. Do not touch.
• Improper work on the system, including
incorrect installation and removal, can lead to
possible injury through an unintended
activation of the "SRS".
• In addition, through improper work there is a
risk of rendering the "SRS" inoperative or
causing unintended airbag deployment. Work
on the "SRS" must therefore only be performed
by an authorized Mercedes-Benz Light Truck
Center.
71
Practical hints Car care
Technical
Index
data