Mercedes-Benz G Series Operator's Manual page 186

1 Lock and unlocking handle
2 Quick Lock
3 Lock
4 End stop joint
To lower brush guard:
While holding brush guard firmly, open quick lock (2)
using lock and unlocking handle (1). Gently lower brush
guard until it reaches its fully lowered position.
Interior equipment
Instruments
Operation
and controls
Instrument
Driving
cluster display
To raise and secure brush guard:
Flip up brush guard until it contacts end stop joint (4).
The quick lock stop pin (2) must engage the cross slot
recess in the lock (3).
Now turn quick lock (2) so that quick lock is making
contact with end stop joint (4).
Lock quick lock (2) on both sides of brush guard using
lock and unlocking handle (1).
Important!
Make sure that both quick lock stop pins (2) are seated
fully in lock (3).
183
Practical hints Car care
Technical
Index
data