Step 5. Levelling The Dishwasher - Scandomestic SFO 3502 W User Manual

Adjust the tension of the door springs by using an Allen key turning in a clockwise motion
to tighten the left and right door springs. Failure to do this could cause damage to your
dishwasher. (Step 11)
The dishwasher must be secured in place. There are two ways to do this:
A Normal work surface: Put the installation hook into the slot of the side plane and secure
it to the work surface with the wood screws.
B Marble or granite work top: Fix the side with Screw.

Step 5. Levelling the dishwasher

Dishwasher must be level for proper dish rack operation and wash performance.
1 Place a spirit level on door and rack track inside the tub as shown to check that the
dishwasher is level.
2 Level the dishwasher by adjusting the three levelling legs individually.
3 When level the dishwasher, please pay attention not to let the dishwasher tip over.
Check level front to back
Check level side to side
NOTE:
The maximum adjustment height of the feet is 50 mm.