Abilica XS 5.0 Manual page 6

Step 3: Assemble the Seat Post
Insert the seat post (42) into the frame's seat tube. Fit the saddle (1) into Seat slider (41) and
tighten the nuts on the bracket securely. Insert the seat slider (41) into the seat post (42) and fix.
Using knob (4) adjusts and tightens the height in proper position.
Step 4: Install Left pedal, right pedal, Computer and bottle holder
Attach the pedals (11) into the crank arms (5)(7), each pedal is marked with the L (left) or R (right)
to denote the side of the spinning bike they are on, Note- the right hand crank is on the same
side as the chain guard (24). Be careful to align the threads correctly to avoid any damage. A
little grease on the threads should help the pedals to screw in easily and correctly, tighten using a
15mm spanner; both pedals threads should tighten towards the front of the spinning bike.
Please always make sure pedals are tightened. If pedals become loose, they will damage crank
threading and pedals.
Tighten clamp (73) on the handlebar (23) then insert the console (43) into clamp (73).
Attach the bottle cage (29) to the frame and tighten it with screws (30) and washer (69).
6