Montering / Assembly / Asennus/Montage - Abilica XS 5.0 Manual

MONTERING / ASSEMBLY/ ASENNUS/ MONTAGE
Step 1: Assemble Front and Rear Stabilizer
Attach the front (16) and rear feet (12) to the frame using the nuts (8), washer (9) and bolts (10).
Step 2: Assemble the Handlebar Post
Attach the handlebar post (23) inserting into the head tube on the frame. Using knob to adjust
and tighten the height in proper position. Then attached handlebar slider (21) on the handlebar
post (23), use release lever (22) to adjust and tighten the handlebar in proper position.
5