General Safety Rules - Würth POWERCUT 70 Operating Instructions Manual

G
B
WARNING:
listed below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this POWERCUT 70
until they have read this manual and have developed a thorough understanding of how
the POWERCUT 70 works.
WARNING:
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
IMPORTANT SAFETY CONSIDERATIONS
1.1 Your Welding Environment
- Keep the environment you will be welding in free from flammable materials.
- Always keep a fire extinguisher accessible to your welding environment.
- Always have a qualified person install and operate this equipment.
- Make sure the area is clean, dry and ventilated. Do not operate the welder in humid,
wet or poorly ventilated areas.
- Always have your welder maintained by a qualified technician in accordance with local,
state and national codes.
- Always be aware of your work environment. Be sure to keep other people, especially
children, away from you while welding.
- Keep harmful arc rays shielded from the view of others.
- Mount the welder on a secure bench or cart that will keep the welder secure and
prevent it from tipping over or falling.
PLASMA CUTTING MACHINE
POWERCUT 70

General safety rules

Read and understand all instructions. Failure to follow all instructions
The warnings, cautions, and instructions discussed in this instruction
SAVE THESE INSTRUCTIONS
3