Hitachi ZW 310-6 Operator's Manual page 194

Outside Rear View Mirror
d
WARNING: Do not move the machine in reverse
by relying on only the range of vision the rear view
mirror (1) provides. Use the rear view mirror only as
a visual aid during travel. Be sure to confirm safety
by looking to the rear when moving the machine in
reverse.
Comfortably adjust seat, then adjust the rear view mirrors
so that good rear vision can be obtained.
Adjust the mirrors so that persons standing on left and
right back-end of the machine (or object with height of
1 m and 30 cm in diameter) can be recognized from the
operator's seat.
Always keep the mirrors clean.
f
NOTE: Optional extensions and other mirror types are
available.
Inside Rear View Mirror
Always keep room rear view mirrors (2) clean.
Cab Door
d
CAUTION: When entering or leaving the cab,
securely close the doors.
f
NOTE: Unless the cab door is securely closed, the room
light switch keeps the room light ON. Securely close the
cab door.
3- Door Lock (Starter key is used)
4- Door Open/Close Lever
OPERATOR'S STATION
1-132
1
(Standard)
3 4
2
M4GB-01-126
MNEC-01-054