Table of Contents
Advertisement
Articulation Stopper (Lock Bar)
d
WARNING: With articulation stopper in LOCKED
position, machine will not steer; which, while
operating, could cause an accident, injury or death. Do
not lock Articulation Stopper during normal operation.
Articulation stopper locks the front and rear chassis to
prevent them from sudden articulation during inspection or
transportation.
To lock:
1. Align the front and rear chassis straight ahead.
2. Remove clip pin (5) and pin (1) from the end of the
articulation stopper (on the rear chassis).
3. Turn link (2) and fix the end to bracket hole (3) on the
front chassis.
4. Insert pin (1) and install clip pin (5). (This is the LOCKED
position.)
To unlock:
1. Remove clip pin (5) and pin (1) from the end of the
articulation stopper on the front chassis bracket.
2. Turn link (2) to the rear chassis bracket (as shown in the
upper illustration).
3. Insert pin (1) and install clip pin (5). (This is the STORED
position.)
SAFETY
S-38
"LOCKED" position
90Z7-7-9-1
90Z7-7-9-2
Advertisement
Table of Contents
Troubleshooting
