Table of Contents
Advertisement
6
GENERAL MAINTENANCE
WARNING
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage. To ensure safety and reliability, all
repairs should be performed by a qualified service
technician.
6
WARNING
Keep the miter saw stand dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum based products
or any strong solvent to clean the miter saw stand .
Chemicals can damage, weaken or destroy plastic which
may result in serious personal injury
MAINTENANCE
ADJUST QUICK RELEASE BRACKET
Refer to Figure 12
The quick release mounting brackets must be secure on
the miter saw stand. If adjustment is needed:
Turn the adjusting nut on the adjustment screw clockwise
to tighten the clamping tension.
Turn the adjusting nut on the adjustment screw
counterclockwise to loosen the clamping tension.
Figure 12
Adjustable
Nut
Advertisement
Table of Contents
