Transportation - PowerTec MT4010 Owner's Manual

TRANSPORTATION

Refer to Figure 10–12
WARNING
Risk of unsafe operation. Ensure proper footing
and use caution when rolling the miter saw stand to
prevent tipping or loss of balance.
• The miter saw stand can ONLY be rolled
from one location to another with the miter
saw mounted.
• DO NOT fold the stand with the miter
saw mounted.
• DO NOT transport the stand with the miter
saw mounted.
To Roll the Miter Saw Stand
• Unlock the wheels.
• Grasp the handles and lift the wheels from the ground
and push the stand to the desired locations.
• Carefully lower the stand to the ground and lock
the wheels.
Figure 10
To Fold Stand for Storage
• Depress the locking levers to unlock the saw/mounting
bracket assembly, tilt the assembly away from you and
lift the assembly away from the stand. Rest the saw/
mounting bracket assembly on the rubber feet.
• Unlock the wheels.
• While holding the handle, reach under the stand and
pull downward on the quick release knob. Slowly lower
the stand until it is completely folded and release the
quick release knob.
Figure 11
Quick Release Knob
• To move the stand, use handle to lift and tilt the miter
saw stand onto the wheels. Move miter saw stand
as shown.
• Holding the handle, carefully lower the stand to
the ground.
Figure 12
Handle
5
Leg
Extension