Table of Contents
Advertisement
In case of the Product sent for Repairing is not under Warranty, the Customer
will be advised and will have to authorized the Repairing out-of-Warranty.
The cost of the Repairing will be charged to the Customer.
In case of unjustified demand of Warranty, the labor cost for checking and
verifying the Product will be charged to the Customer.
3
Product installation
Take the instrument out of the package and follow the procedure to
carry out a vehicle first exhaust gas analysis in ten minutes.
3.1 Power supply
The device shall be powered through the network cable supplied with the
package.
Insert the supply cable in the outlet placed in the instrument rear side, as
shown in the picture below.
Turn on the instrument by pushing the rocker switch near the outlet.
1161306-0
27
Advertisement
Table of Contents
