Table of Contents
Advertisement
4.2.6 Print report
Select the "Print" item and confirm it with the key ↵.
Enter the vehicle data: make, model, number plate,
frame number, mileage, year of first registration.
Lastly, enter the name of the technician that carries out
the test.
4.3 Analyzer configuration
Enter the configuration menu when you want to change the settings (date and
time modification), and each time you modify the used configuration (for
example, when you pass form a rev counter with pliers to a M.C.T.C.NET
one).
4.3.1 Workshop data set-up
Press the F key upon instrument initial message display, or "ESC" twice if you
are in the test type selection page.
The menu below will be displayed.
Select the Set-up item and press the key (↵) to confirm.
Select the "Workshop data" item and press the key (↵) to
1161306-0
►Set-up
Service
Repeat test
Change result
►Print
End
►Set-up
Service
Rev counter
33
Advertisement
Table of Contents
