Before Use - Hitachi H Series Instruction Manual

4. About preventive maintenance
Do not connect the
disassemble, heat, place in fire, or short-circuit the battery.
There is a risk of explosion or fire.
Do not disassemble or modify the unit.
These actions may result in fire, malfunction, or malfunction.
Turn off the power supply before removing or attaching module/unit.
Electric shock, malfunction or failure may result.

Before Use

This product has been manufactured carefully, however, please carry out
an examination for the following points:
(1) Whether the received CPU link module satisfies the type and
specifications in the order sheet.
(2) Whether there is any damage sustained in transit.
(3) Whether the accessories shown below are provided.
If any injury or dissatisfactory point is found, the supplier should be
notified.
Name
Jig cable for checking transfer loop back
Jig cable for checking transfer loop back
Insulating tube for cable connector insulation
Keep jig cable (for transfer loop back check). It is needed to check each module for
performance.
DANGER
, of the battery in reverse. Also, do not charge,
PROHIBITED
CAUTION
(Coaxial cable: Only LINK-SH)
(Optical cable: Only OLINK-SH)
5
(Only LINK-SH)
Quantity
1
1
2