Safety Instructions - Moulinex MASTERCHEF GOURMET HF80C Manual

NOTICE_PASTA_BOX_0828670-02_PASTA BOX 22/03/12 10:58 Page8
DESCRIPTION
E - Attachment holder
I - Fresh pasta kit
I1 Special fresh pasta mixing
paddle
I2 Plastic body
I3 Feed screw
I4 Discs:
- I4-1 : Orecchiette
- I4-2 : Fusilli
- I4-3 : Pappardelle
- I4-4 : Spaghettoni / Bigoli
- I4-5 : Bucatini
- I4-6 : Rigatoni

SAFETY INSTRUCTIONS

• Your fresh pasta kit is designed
exclusively for Kitchen machine of
QA403 or QB403 type (this code is
found on the label under
appliance).The manufacturer shall not
be liable for damages resulting from its
use on another appliance.
• This appliance is not designed to be
used by persons (including children)
with reduced physical, sensorial or
mental capacities, or by people with
no prior knowledge or experience,
except where they have benefited from
supervision or previous instructions
relating to the use of the appliance,
from a person responsible for their
safety.
• Children should not be allowed to play
with the appliance.
• Always unplug the appliance as soon
as you have finished using it and when
I5 Ring nut
I6 Pasta cutter
I7 Storage base
I8 Spanner / Pusher
J - Coulis attachment
J1 Plastic body
J2 Drive + spring
J3 Feed screw
J4 Filter
J5 Ring nut
J6 Collector
F7 Pusher
F8 Tray
you are cleaning it.
• With the fresh pasta attachment (I),
always use the spanner / pusher (I8)
your to guide the pasta through the feed
tube. Never use your fingers, a fork, a
spoon, a knife or any other object.This
applies to the coulis attachment as
well (J): always use the pusher (F7) to
guide the food through the feed tube.
• Never touch any moving parts and
wait for the appliance to come to a
complete stop before
accessories.
• Do not touch the special fresh pasta
mixing paddle when the appliance is
running (I1)
• Switch off the appliance and unplug it
from the mains power supply before
changing the accessories or touching
the parts which move
operation.
8
The paragraph numbering corresponds to the numbers in the diagrams.
1 - MAKING FRESH PASTA
1.1 - PREPARING THE DOUGH
To make the perfect pasta using the
correct recipe is very important. That is
why the ingredients in the recipe below
must be weighed accurately using
weighing scales. Also the moisture
content of the flour varies so it may be
necessary to adjust the consistency.The
prepared dough must form large clumps
(like coarse crumble), which can be
formed into small balls by pressing small
amounts of dough by pressing with your
fingers. If the dough is too dry, it can
damage your pasta maker. If the
prepared dough forms a large ball it
contains too much liquid.
ACCESSORIES USED:
- Bowl assembly (b)
- Special fresh pasta mixing paddle (I1)
Plain pasta recipe:
- 300 g Italian '00' flour (sold for making
pasta)
- 150g beaten eggs (i.e. about 3
medium eggs)
- 1 pinch of salt
removing
Very important : Never exceed this
amount of flour and exclusively use the
special fresh pasta mixing paddle (I1) to
prepare the dough.
• Press the button (a2) to release the
multi-function head (a3) and raise it
until it locks in place.
during
• Lock the stainless steel bowl (b1)
(clockwise) on the appliance and put
in the flour.
• Insert the special fresh pasta mixing
paddle (I1) on the outlet (a6), push
and rotate it anti-clockwise a quarter
turn to lock the accessory in its
housing. Add the flour and salt.
• Place the multi-function head (a3) in
the horizontal position: press the button
(a2) and manually lower the multi-
function head (a3) until it locks (the
button (a2) returns to its initial
position).
• Slide the lid (b2) over the stainless steel
bowl (b1).
• Run the appliance for a few seconds
on speed "1" and then pour the
beaten eggs through the hole in the
lid.
• Continue on speed "1" for about 30
seconds and then increase to speed 2
for about 1 more minute.
1.2 - USING THE PASTA MAKER
ACCESSORIES USED:
- Attachment holder (E)
- Pasta maker (I2 to I6)
- Spanner / Pusher (I8)
➢ FITTING THE ATTACHMENT HOLDER
• Press the button (a2) to release the
multi-function head (a3) and raise
it until it locks in place.
• Place the attachment holder (E)
and lock it in the anti-clockwise
direction such that the outlet is in
alignment with the appliance.
• Place the multi-function head (a3)
9