INVT Goodrive18 Series Operation Manual page 94

Goodrive18 series two-in-one VFD
Function
Name
code
Speed deviation
P11.14
detection value
Speed deviation
P11.15
detection time
Extension
P11.16 function
selection
P13 SM control
Short circuit
P13.13
braking current
Hold time of
P13.14 short circuit
braking at start
Hold time of
P13.15 short circuit
braking at stop
P14 Serial communication
Function parameters and function terminal reuse
0.0–50.0%
See the following figure.
Actual detection
value
Set detection
value
t1<t2, so the VFD continues running
t2=P11.15
Setting range: 0.0–10.0s
0x00–0x11
LED ones: Automatic frequency drop selection at
voltage drop
0: Invalid
1: Valid
LED tens: Second ACC/DEC time selection
0: Invalid
1: Valid. When the running frequency exceeds
P08.36, ACC/DEC time is switched to the
second ACC/DEC time.
When the VFD is starting, if P01.00=0, set
P13.14 to a non-zero value to begin short circuit
braking.
When the VFD is stopping, if the running
frequency is less than P01.09, set
non-zero value to begin short-circuit braking and
then enter DC braking that lasts P01.12. (For
details, see the description of
P13.13 setting range: 0.0–150.0% (VFD)
P13.14 setting range: 0.00–50.00s
P13.15 setting range: 0.00–50.00s
-89-
Description
Speed
t1
t2
Running Fault output
P13.15
P01.09–P01.12.)
Default
value
10.0%
0.5s
Time t
dEu
0x00
0.0%
0.00s
to a
0.00s
Modify
○
○
○
○
○
○