How To Copy Function Parameters - INVT Goodrive18 Series Operation Manual

Goodrive18 series two-in-one VFD
The units place is blinking.

4.3.5 How to copy function parameters

The external keypad for operating Goodrive18 series two-in-one VFD supports common
parameter copying and embedded parameter copying. The embedded parameter copying
function means that the keypad housing contains the
uploaded and downloaded after P07.01 is set. A common keypad does not have this icon.
Before using the parameter copying function, copy local function parameters to the EEPROM
of the keypad. Then the parameters can be downloaded to another VFD.
To upload parameters, set P07.01 to 1, and press DATA. The keypad displays "-UP--" in
blinking way, indicating the VFD parameters are being uploaded to the keypad. After the
upload is completed, the keypad displays P07.01.
To download parameters:
If all function parameters need to be downloaded, set P07.01 to 2 and press DATA. The
keypad displays "-dn1-" in blinking way, indicating the parameters saved on the keypad are
being downloaded to the VFD. After the upload is completed, the keypad displays P07.01.
If function parameters excluding parameters in P02 and P12 need to be downloaded or only
parameters in P02 and P12 need to be downloaded, set P07.01 to 3 or 4. The keypad displays
"-dn2-" or "-dn3-" in blinking way.
PRG
ESC
All digits are
PRG
ESC
blinking.
DATA
ENT
Note: When setting the value, you can press
Figure 4.6 Viewing parameter setting
The units place
is blinking.
PRG
ESC
DATA
ENT
»
and
SHIFT
-27-
The units place is blinking.
DATA
ENT
PRG
ESC
The units place is blinking.
+ to modify the value.
icon and parameters can be
Operating