At The End Of A Wash Programme - Baumatic BTWM4 Instruction Manual

Fully integrated full height washing machine
Table of Contents

Advertisement

At the end of a Wash Programme

Provided the programme completes without
interruptions, you can open the loading door 2
minutes after it has completed. The 'ON' light will
go out to indicate that the door safety locking
mechanism has disengaged.
Remember that you must wait two minutes for
the door safety function to disengage. You can then
open the door by pulling the handle of the door
towards yourself.
o Take out your clothes.
o After you unload your clothes, leave the door
open to dry the inside of your machine.
o Unplug your Washing Machine.
NOTE: If the power goes off (blackout) and on again after a
while at any stage of the washing programme, your machine
will continue the programme from the same place it had
stopped. Note that this is not harmful for your machine.
In addition, before leaving your appliance after a washing
programme:
Press in the two knobs.
Ensure that you leave the washing machine's door
open after the end of a washing cycle as it will need to
clear moisture from its drum.
Be careful not to close the outer door over it as this
may cause damage.
NOTE : The programme and temperature knobs
need to be pressed in before you close the door.
The programme knob tends to require being
pressed twice in order to recess so you can
then close the door.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents