Included In Shipment; Remaining Hazards; Technical Data - Scheppach woova 2.0 Translation From The Original Instruction Manual

• Do not allow foreign objects such as screws, nails, plas-
tic or wood chips to enter the cleaning nozzle.
• The machine must only be used with original parts and
orginal accessories supplies by the manufacturer.
• The Exhaust System woova 2.0 is constructed exclusive-
ly for exhaust-vacuuming wood chips and saw dust and
may only be used in connection with wood processing
machines.
• When vacuuming shop floors, wood or metal pieces may
not be vacuumed.
• Any other use exceeds authorization. The manufacturer
is not responsible for any damagesresulting from unau-
thorized use; risk is the sole responsibility of the opera-
tor.
• The safety, work and maintenance instructions of the
manufacturer as well as the technical data given in the
calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other, gen-
erally recognized safety-technical rules must also be ad-
hered to.
• The machine may only be used, maintained, and operat-
ed by persons familiar with and instructed in its operat-
ing and procedures. Arbitrary alterations to the machine
release the manufacturer from all responsibiliy for any
resulting damages.
•
The machine may only be used with original accessories
made by the manufacturer.

Included in shipment

Dust extractor woova 2.0
Filter bag
Earthing set
Extractor hose diam.
Hose end piece diam.
Operating instructions

Remaining hazards

The machine has been built using modem technology in
accordance with recognized safety rules.Some remaining
hazards, however, may still exist.
Wood chips and sawdust can be health hazards. Be sure
•
to wear personal protective gear such as safety goggles
and a dust mask.
• Dust inhalation may occur when closing and replacing
the dust bag.
Please note the instructions concerning proper disposal
in the operating manual (e.g. the use of P2 dust masks)
to prevent dust inhalation.
• Noise can be a health hazard. The permitted noise level
is exceeded when working. Be sure to wear personal pro-
tective gear such as ear protection.
The use of incorrect or damaged mains cables can lead
•
to injuries caused by electricity.
• Even when all safety measures are taken, some remain-
ing hazards which are not yet evident may still be pre-
sent.
• Remaining hazards can be minimized by following the
instructions in "Safety Precautions", "Proper
in the entire operating manual.
Dimensions:
Overall length mm
Overall width mm
Overall height mm
Overall height with filter cartridge mm
Ectractor duct connections ø mm
Hose ø mm
Hose length mm
Wheel diameter mm
Approx. weight kg
Performance:
Rate of air flow m
Pressure differential Pa
Filter aera (filter bag) m
Filter aera (filter cartidge) m
Sawdust bag capacity litres
Power plant:
Electric motor 230 V/5O Hz
Nominal input P1
Output power P2
Motorspeed 1/min.
Work Place Emissions Values:
Empty Run Noise dB (A)
Working Noise dB (A)
For packaging reasons your
assembled state.
Tools required for assembly
not included in shipment
100 mm 1 Open-end wrench SW 10
100 mm 2 Open-end wrenches SW 13
1 Nut driver SW 8
1 Screwdriver
Assembly frame Fig. 1
Axle and wheels
2 lock washers
• Place the wheels onto the wheel axle. Use the assembly
tool and a hammer, and force the fastening cap on to
the wheel axle.
Fig. 2
Screw housing onto frame
4 hex screws M8 x 12
4 serrated lockwashers A 8,2
Insert filter bag hanger.
Extractor hose
Put hose clamps over hose ends,Insert hose couplings and
tighten the hose clamp. Clamp the extractor hose tightly onto
the housing bracket with hose clamp.
Filter bag, Fig. 3
• Lay locking band (279 mm diameter) on housing.
• Fit filter bag over housing collar and fasten with locking
band.
Use" and
Sawdust bag, Fig. 4
• Open clamping lug.
• Fit sawdust bag over ejection opening, fold at clamp re-
cess and close clamping lug.
• Lay locking band (370 mm diameter)over sawdust bag
and fasten.

Technical data

3 /h
2
2
Assembly
ha 2000 is delivered in semi-
656
490
1850
1850
100
100
2000
75
24,4
800
1000
1,00
5,00
80
0,40 kW
0,30 kW
2780
75
75
english 7