System Setup
Refer to the following diagrams, and complete the system installation as described on pages 20 to 23.
Caution: Do not make system connections until instructed to do so during the system
installation procedure. In some instances, configuration steps must be performed before physical
connections are made.
Typical Setup Diagram for PCS500R with RF Output
Laptop PC
(for installation purposes)
Room Receiver
Service Port connection
Feature Port
RF-TAP
RF-OUT
RF Cable
Combiner
RF Distribution
System
PCS500R
Control Port
POWER
19 V DC
Service Port
USB
(eth0)
Switch
Laptop PC
(for remote management)
Internet
Router
17