Training; Cleaning And Servicing; Warranty - ADE HANSE Series Operating Manual

Table of Contents

Advertisement

7.

TRAINING

Operators must have come of age must be sufficiently instructed in the operation, cleaning, maintenance of
the meat slicing machine and in sharpening the blade whilst the machine is being installed. In particular, they
must be informed about the dangers that may result from improper use of the machine.
Training must be carried out by the person installing the machine. This person should also have sufficient
knowledge of the relevant European mechanical engineering standards.
8.

CLEANING AND SERVICING

Meat slicing machines may only be cleaned by trained personnel.
Remove the plug from the socket. Note that switching off a machine by pressing the red stop button can in
no way be considered adequate disconnection of the machine.
At least two persons are required to set up the machine, with the four feet serving as reference points.
The cutting blade must be replaced once the distance between the cutting blade guard and the blade
reaches 6 mm.
Take particular care of the sharp blade when doing so.
Note that the electrical cable may only be replaced by authorised and trained personnel.
Cleaning meat slicing machines with cleaners that could be harmful to the health of either the operator or
of customers is expressly forbidden. Only products with a Ph of 7-8 may be used for cleaning.
9.

WARRANTY

ADE will repair or replace this product within a period of 2 year from date of delivery applying to defects oc-
curred due to poor material or workmanship (invoice is necessary).
All moveable parts are excluded. The warranty does not include natural ear, damages caused by incorrect or
negligent handling, overuse or unsuitable or improper storage.
The manufacturer refuses each direct or indirect responsibility of the following circumstances:
Disregarding of instruction
Usage by untrained personnel that is not familiar with the instruction
Usage that does not correspond to the valid prescriptions
Non authorized modification or repair
Usage of equipment and accessories that is not from manufacturer's origin
The legal rights of the customer are not hindered by the agreement of this warranty.
In case of registering a complaint, contact the dealer that has sold the product.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hanse 250-230Hanse 300-230Hanse 300-400

Table of Contents