Fujitsu DL3100 User Manual page 163

FUJITSU DL3100
Barcode Space Adjustment
1. Description
(1) Value of p
(2) Positive and negative p
(3) "space width" is the total space occupied by a
(4) Power-on the printer, *INPRM, or reset command
(5) This command acts on subsequent received
2. Valid values
n= <00>16, <01>16, <02>16, <03>16, <FD>16,
Notes
• < >16 = Hexadecimal
User's Manual
Function
defines the adjust amount on the width
1
of a space in barcode. (Use two's complement for
negative values.)
n Space Adjustment
-3<FD>16 -3/360 inch
-1<FE>16 -1/360 inch
0<00>16 0 (default)
1<01>16 1/360 inch
2<02>16 2/360 inch
3<03>16 3/360 inch
respectively, the width of a space element.
narrows space, a wide space and the gap between a
character.
restore the default space width.
barcode commands.
<FE>16, (-3 ≤ P1 ≤ 3)
increase and decreases,
1
Command
ESC e 5 n
C-23