Fujitsu DL3100 User Manual page 11

FUJITSU DL3100
When mounting or removing ribbon, turn off the power to the printer and personal computer and
disconnect their power plugs from the outlets beforeperforming the work.
Otherwise, electric shock may result.
Connect only Fujitsu-recommended ribbon.
Otherwise, electric shock or fire may result.
Do not block openings in the printer (e.g., ventilation openings)
If ventilation openings are blocked, heat accumulates inside the printer, possibly resulting in a fire.
Do not place a heavy object on the printer. Also, do not subject the printer to shocks.
Otherwise, the printer may become unbalanced, causing it to fall, and possibly resulting in personal
injury.
Do not place the printer in an area exposed to strong vibration or an unstable area such as on a
slope.
Otherwise, the printer may fall or topple, possibly resulting in personal injury.
Do not leave the printer in an area exposed to direct sunlight for a long time, such as inside a car
under the sun or any other area subjected to high temperatures.
Otherwise, the printer surface heats up, possibly melting covers or resulting in other deformities, or
the inside of the printer may become extremely hot, possibly resulting in fire.
Before moving the printer, be sure to disconnect the power plug from the outlet and disconnect all
connected cables from the printer.
Otherwise, the power cord may be damaged, possibly resulting in electric shock or fire, or the
printer may fall or topple, possibly resulting in personal injury.
Before connecting or disconnecting a printer cable, be sure to turn off the power to the printer and
personal computer.
Performing that and related work without the power turned off may result in a personal computer or
printer failure.
User's Manual
WARNING
CAUTION
ix