Table of Contents
Advertisement
Figure 25: ADAM-6000 Module under the ADAM.NET Utility Software
If network Firewall is enabled on your computer, you may not be able to connect with
your ADAM-6000 module. You need to add ADAM.NET Utility into the list of
exceptions. See section 9.4
4.
You need to change the IP address of the ADAM-6000 modules the same subnet with the host
PC. Type the correct <IP address>, <Subnet address>, and <Default gateway> on the status
③
display area
For more information on setting the host PC see section 5.8.1
for the
PC, page 23.
5.
When completed, click the <Apply Change> button
type the password. The default password of ADAM-6000 module is 00000000.
Pi20
①
②
Defining of Firewall
.
Exceptions, page 56!
④
. A dialog box appears, asking you to
Rev. B 09/2011
Appendix
④
③
Changing the Ethernet Settings
55
Advertisement
Table of Contents
