Table of Contents
Advertisement
Accessories
Tighten rear cover 3x screws, then tighten 2x
setscrews on outer slide as shown.
Slide camera forward if needed and ensure that
camera conduction plate makes contact with
inside surface of enclosure in order to ensure
adequate thermal conductivity.
Sunshield
Install front Germanium window cover by
tightening 3x screws then install sunshield as
shown.
Germanium
window cover
Tighten rear cable glands to create seal around
cables.
Pi20
39
Rev. B 09/2011
Advertisement
Table of Contents
