Steelcase Huddleboard Manual

Table of Contents

Download this manual

Hanger Hooks, Ledge Grabbers, Flip Chart Pegs, Marker Grip

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

2012 Steelcase Inc.

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

PANEL/STRUCTURAL TRAY

Huddleboard

™

Products

939504755 Rev F

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Huddleboard and is the answer not in the manual?

Page 1 Hanger Hooks, Ledge Grabbers, Flip Chart Pegs, Marker Grip MOBILE EASEL If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you.
Page 2 Maintenance Push marker Clean with warm soapy water, into grip. wipe with sponge and allow to NOTE: Huddleboard air dry. boards are not designed Page 2 of 4 to be ganged together. 939504755 Rev F...
Page 3 ® PANEL/STRUCTURAL (DRYWALL) TRAY Tray Assembly and Installation Align and mount brackets (A) to respective panel or structural wall (drywall). NOTE: For Architectural mountings, mount brackets (A) 6” inboard to the end of tray location. For all other panel systems, mount brackets at desired height.
Page 4 Mobile Easel Assembly ® Step 1 Remove easel (A) from box and press casters (B) into base (C) (a rubber mallet may be necessary). NOTE: If locking caster option is included, install MOBILE EASEL locking casters in the two front positions. Board Storage Capacity Remove tray (G) from sub-board (H).