Silvercrest SNS 45 A3 Operating Instructions Manual page 114

NOTICE
► After the expiry of the preselected treatment time the UV lamps are switched
off automatically.
The Start button 0 and a time preselect button (9, 7 or 5) must be acti-
►
vated again for each new treatment.
♦
Examine each nail, after the application and hardening of all coatings, for
unevenness, small scratches or ridges.
♦
If you discover unevenness, apply a further thin layer of UV gel a and hard-
en the nail with the setting of 150 seconds or 90 seconds (depending on the
amount of applied UV gel a).
Even after the last hardening of the Gel layer, the nails may feel a feel sticky
("sweat-layer" or polymerization layer).
♦
Moisten a cellulose pad z with fi nishing solution o and then wipe this over
the nail.
SNS 45 A3
GB
111