Table of Contents
Advertisement
Hydraulic Handle Control Assembly
The handle control assembly consists of a handle grip, an outlet with a female quick-disconnect coupler
and protector cap, and a cordset. It is available with or without a hose assembly. The handle control is
operated by three switches (marked RUN, DUMP, and RESET).
Hydraulic handle
control assembly
Hydraulic Hose Assembly
The hose assembly is a hose with male quick-disconnect coupler and protector cap on each end.
NOTE
The date of manufacture of the hose is marked on the hose in the format MM-YYYY. MM represents the month of manufacture
and YYYY represents the year. The hose should be replaced after five years.
Foot Control
The foot control consists of base with a guard and a cordset. The foot control is operated by three pedals
(marked RUN, DUMP, and RESET).
Rev G
Table 5: Hydraulic handle control assembly part numbers
Length (m [ft])
59907-7
2.1 [7]
1-59907-5
4.6 [15]
2-59907-1
6.4 [21]
2-59907-8
8.5 [28]
1-59908-5
4.6 [15]
2-59908-1
6.4 [21]
Table 6: Hydraulic hose assembly part numbers
Hydraulic hose
assembly
59909-3
59909-7
1-59909-5
2-59909-1
Table 7: Foot control part number
Foot control
Cordset length (m [ft])
68284-1
Description
With hose assembly
(hose and cordset)
Without hose assembly
(cordset)
Length (m [ft])
1.0 [3]
2.1 [7]
4.6 [15]
6.4 [21]
4.6 [15]
409-1950
8 of 22
Advertisement
Table of Contents
